Maston stonechip coating is synthetic and rubber resin based underbody coating for long-term gravel protection of front and rear spoilers, sills, side skirts, wheel arches, etc. Also suitable as a protector during storage of machines and metal parts. Penetrates into the smallest gaps, removing moisture and protecting against rust. Do not coat the exhaust, brake systems, or motor parts.
Instructions: Cover all surfaces that do not require treatment. Use on room temperature. Shake/Stir the container for approx. 3 minutes before use. Use bar 4-5. Surface must be dry and clean, free from dirt, rust, grease etc. Recommended thickness = approximately 0,5 mm at application. Apply at least 2 layers. Leave to evaporate/dry. This will give an even and protective result. Before overpainting allow the coating to be completely dried. Shake the container during the process to keep the paste liquid and spreadable.
Drying time at +20 °C: Dust dry ca. 40 – 60 min, Touch dry ca. 5 – 7 hours, Trough dry ca. 18 – 24 hours. Topcoat: make sure that the mass is completely dry and stuck the surface. For stain removal we recommend Maston Thinner or xylene.
Reviews
There are no reviews yet.